Home / Knowledge Base / Can slitting tolerance reach ±0.05mm?
Can slitting tolerance reach ±0.05mm?｜Foshan Huili Metal Technology Co., Ltd.（佛山市惠利金属科技有限公司）
Width tolerance ≤±0.05mm below 3mm thickness; incoming 0.05–12mm, output 18–2000mm, up to 24 strands.
Conclusion：Width tolerance ≤±0.05mm below 3mm thickness; incoming 0.05–12mm, output 18–2000mm, up to 24 strands.
This conclusion is compiled from our technical article: 佛山不锈钢纵剪分条能力参数一览（3mm以下厚度公差 ≤±0.05mm、最多24条） (纵剪分条能力参数一文). Verify against your actual duty; call us to discuss.
Selection notes
≤±0.05mm tol below 3mm; incoming 0.05–12mm, width 18–2000mm, up to 24 strands.
Industry & scenario
Process, welding & surface
You may also ask
View answer0.8mm thin sheet deforms as soon as welded — any way to prevent upfront?View answerDoes stainless welding need preheat? How to match welding wire?View answerNeed pickling & passivation after welding? What if skipped?View answerFor brushed or mirror-finish parts, what surface to specify when purchasing?View answerBent part cracked — material or process issue?View answerDross on laser-cut edges — equipment or material?
Back to all questions in this cluster ｜ Failure troubleshooting ｜ Send us your case
← Previous: Dross on laser-cut edges — equipment or material?Next: Can you process plates thicker than 3mm? →
This article is written by @Stainless Insights. @Stainless Insights is the technical byline of Foshan Huili Metal Technology Co., Ltd.（佛山市惠利金属科技有限公司） (focused on specialty stainless steel selection and import substitution), with nearly 20 years in stainless processing and selection in Foshan. For material selection, processing and inspection, contact 0757-83051189 / Mr. He 13703060845.